For almost a year I have a two way radio mounted on my bike to communicate with my dad when he’s riding behind me when we’re touring.
I tried to talk to him over the wired set, but it only transmitted muffled voice and wind noise. Even when I had my chin flap mounted.
He was sick of it and wanted me to buy a Sena SR10.
So I did when they were on stock again.
– Bad voice quality
– Bike to car communication
– 1x Sena 3S
– Wired helmet communications
The solution was clear, the Sena SR10 will solve all these problems with wind noise, bike to car communication (this one still doesn’t exist as a standalone version) and it’s wireless!
– Sena SR10
– PTT button
– PTT button extension cord (spiral)
– Aux cord (for when you use it with your phone/gps/mp3)
– USB and 12v car adapter
– Belt clip
– Handlebar mount kit
You still need a proprietary cable to connect your Sena SR10 to either iCom, Motorola single pin, Motorola dual pin, Yaesu, Midland and Kenwood two way radios.
These cost about 24€
I have an iCom and Motorola Single pin device. In the pic below you can see the iCom radio, because I still don’t have acquired a Motorola Single pin cable.
So how does it do it?
It’s simple: Sena Magic!
For what I know, the PTT button will transmit when the SR10 is powered on, but no voice will come through if no headset is paired.
The SR10 should work with all bluetooth headsets, but with my Sena 3S I had to press the “+” button for 5 seconds to pair in “phone” mode instead of the intercom mode.
The cool thing is that the louder you set the volume on the radio, the louder it gets on the speaker.
Combined with Sena products, the sound quality is amazing, without wind noise! (as per my dad.)
Mounting on the bike/yourself
I have made a gadget rack that connects the whole “intercom array” to the bike using a rip off gopro mount. It works especially well.
It’s much more easier to mount and remove the whole array than removing the SR10, intercom, cables and all that one by one.
You can also choose to use the belt clip or handlebar mount to attach it to your belt or handlebars.
+ Universal pairing
+ Incredible sound transmission
+ Long stand by time
– Rather expensive at 180€-200€
– Proprietary cables that cost 24€ extra
– Bit bulky
It’s Sena quality, so it should be all good and waterproof.
With the right radio, bike to car communications will be easier than calling.
I’ve never travelled longer than 7 hours straight, so I can’t know how long the Sena could do in stand-by and talk times, but that shouldn’t be a problem because you can charge it via a powerbank using a micro USB cable.
If you are a person that rides a motorbike and occasionally have a follow car and a two way radio set to spare, the Sena SR10 should be the solution to your problem!